Loop Hangers STEEL (2) COPPER (4)

Bolt/Rod Size 1/2 Inch Diameter (1) Channel Width 1-5/8 Inch (3) Clamp Material Steel (3) Conduit/Cable Size 3/8 Inch (Rod) (3) Construction 1-Piece (4) 1-Piece Break Apart (5) 2-Piece (13) Two Piece (1) Drive Style Phillips (1) ENHANCED SEO SEO (1) Finish Armour (1) Copper Electroplated (9) Electrogalvanized (64) Electrogalvanized, Pre-Galvanized (1) Epoxy Powder Coated (1) Plain (8) Pre-Galvanized (7) Pregalvanized (6) Hanger Mounting Size 1/2 Inch (5) 3/4 Inch (3) 3/8 Inch (22) 5/8 Inch (2) 7/8 Inch (1) Height 1-1/8 Inch (1) 10-9/16 Inch (1) 11-1/16 Inch (1) 13-13/16 Inch (1) 16-1/2 Inch (1) 2-1/2 Inch (1) 2-13/16 Inch (1) 2-5/16 Inch (1) 3 Inch (1) 3-1/4 Inch (1) 3-1/8 Inch (2) 3-3/16 Inch (2) 3-3/8 Inch (1) 3-5/16 Inch (1) 4-3/8 Inch (1) 4-5/16 Inch (2) 6-1/16 Inch (1) 6-13/16 Inch (1) 6-3/4 Inch (1) 7-7/16 Inch (1) 9-1/16 Inch (1) Hole Size 9/16 Inch Diameter (1) Hole/Slot Size 9/16 Inch Dia (1) 9/16 Inch Diameter (2) Installation Hammer-On, VAFT Tool (1) Set Screw (3) Item Size 1-1/8 Inch Width x 3/4 Inch Depth (1) Jaw Width 4 Inch (1) Length 1-3/4 Inch (2) 1-5/8 Inch (1) 1/2 Inch (1) Load Capacity 100 Pound (1) 1200 Lb (1) 200 Lb (1) 200 Pound (1) 250 Pound (1) 250 Pound, 500 Pound (1) 500 Pound (1) 500 Pound (F1), 250 Pound (F2) Static (1) 760 Pound, 950 Pound (1) 760/950 Pound (1) 950 Pound (F1), 760 Pound (F2) (2) 950 Pound (Static Load 1), 760 Pound (Static Load 2) (2) Load Rating 1130 Pound (Static) (4) 1430 Pound (Static) (1) 180 Lb (1) 180 Pound (1) 180 Pound (Static) (14) 180 Pound Static (1) 1940 Pound (Static) (2) 2000 Pound (Static) (1) 215 Pound (Static) (1) 250 Lb (1) 250 Pound (1) 255 Pound (Static) (1) 2700 Pound (1) 300 Lb (1) 300 Pound (Static) (6) 3600 Pound (Static) (1) 40 Pound (Static) (1) 400 Pound Static (2) 48 Pound (Static) (1) 600 Lb (2) 600 Pound Static (3) 610 Pound (1) 610 Pound (Static) (1) 610 Pound Static (1) 800 Lb (1) 850 Pound (1) 900 Pound (1) Material 11 Gauge Steel (1) 12 Gauge Steel (1) 304 Stainless Steel (2) Armor Spring Steel (1) CADDY Armour Spring Steel (1) Cast Iron (9) Co-Polymer (2) Electrogalvanized Steel (4) Malleable Iron (1) Polyamide Spring Steel (1) Steel (50) Steel, EPDM-SBR (2) Steel, EPDM-SBR Rubber (8) Steel, Polyethylene (1) Steel, Polypropylene (4) Steel, Polypropylene (Cushion) (1) Steel/Polypropylene (8) Maximum Jaw Capacity 1-1/4 Inch (3) 1-1/4 Inch Thickness (1) 1/2 Inch (1) 13/16 Inch (4) 3/4 Inch (2) Maximum Pipe Size 1 Inch (4) 1 Inch (Pipe), 1-1/4 Inch (Copper Tube) (1) 1-1/2 Inch (3) 1-1/4 Inch (2) 1-1/4 Inch (Pipe), 1-1/2 Inch (Copper Tube) (1) 1/2 Inch (4) 1/2 Inch (Pipe), 3/4 Inch (Copper Tube) (1) 1/4 Inch (Pipe), 3/8 Inch (CTS) (1) 10 Inch (1) 2 Inch (4) 2 Inch (Pipe) (1) 2-1/2 Inch (1) 3 Inch (3) 3 Inch (CTS) (1) 3-1/2 Inch (1) 3/4 Inch (4) 3/4 Inch (Pipe), 1 Inch (Copper Tube) (1) 3/8 Inch (Pipe), 1/2 Inch (Copper Tube) (1) 4 Inch (1) 5 Inch (1) 6 Inch (2) 8 Inch (1) Minimum Pipe Size 1 Inch (4) 1 Inch IPS, 1-1/4 Inch CTS (1) 1-1/2 Inch (2) 1-1/2 Inch IPS (1) 1-1/4 Inch (2) 1-1/4 Inch IPS, 1-1/2 Inch CTS (1) 1/2 Inch (4) 1/2 Inch IPS, 3/4 Inch CTS (1) 1/4 Inch (Pipe), 3/8 Inch (CTS) (1) 10 Inch (1) 2 Inch (3) 2 Inch CTS (1) 2 Inch IPS (1) 2-1/2 Inch (1) 3 Inch (3) 3 Inch (CTS) (1) 3-1/2 Inch (1) 3/4 Inch (4) 3/4 Inch IPS, 1 Inch CTS (1) 3/8 Inch IPS, 1/2 Inch CTS (1) 4 Inch (1) 5 Inch (1) 6 Inch (2) 8 Inch (1) Mounting Hole Size 0.2 Inch (1) 3/16 Inch (1) 7/32 Inch (5) Mounting Size 3/8 Inch Threaded (1) Nominal Diameter #8 (1) 1/2 Inch (1) 3/8 Inch (5) Number of Holes 2 (1) 4 (1) 7 (1) Number of Sides 2 (2) 3 (1) Outer Diameter 0.56 to 0.66 Inch (1) 0.84 Inch (1) 0.86 to 0.98 Inch (1) 1 Inch (1) 1-1/4 Inch (1) 1-1/8 Inch (1) 1-5/8 Inch (1) 1-7/8 Inch (1) 1.05 Inch (2) 1.315 Inch (1) 1.51 to 1.6 Inch (1) 1.66 Inch (1) 1/2 Inch (1) 1/4 Inch (1) 2-5/8 Inch (1) 2.375 Inch (1) 3-1/8 Inch (1) 3/4 Inch (1) 3/8 Inch (1) 4.37 to 4.54 Inch (1) 5/8 Inch (1) 7/8 Inch (2) 8.5 to 8.63 Inch (1) Overall Dimensions 15/16 Inch W x 2-3/8 Inch H (1) 15/32 Inch Height (2) Overall Height 3-1/4 Inch (1) Overall Length 10-3/8 Inch (1) 11 Inch (1) 22-3/8 Inch (1) 9 Inch (1) Pipe Size 12 Inch (1) 2-1/2 Inch (1) 3/4 Inch (1) Purlin/Beam/Flange Size 1/16 to 1/4 Inch (1) 1/4 Inch (4) Rod Size 1/2 Inch Diameter (1) 3/8 Inch Dia (1) 3/8 Inch Diameter (1) Screw Size 1/4 Inch (1) 3/8 Inch (1) Screw Type Set Screw (2) Square Head (1) Screw/Bolt Size 3/8 Inch Diameter x 1-1/2 Inch Length (1) Shield Inner Diameter 2-1/8 Inch (1) 4 Inch (1) Shield Length 12 Inch (2) Shield Material Steel (2) Shield Number 1-1/2 Inch (1) Shield Thickness 18 Gauge (2) Size 2-1/4 Inch x 1-5/8 Inch (1) 4-1/8 Inch L x 4-1/8 Inch H (1) 4-1/8 Inch x 3-1/2 Inch (1) Strap Length 2-15/16 Inch (2) 2-5/16 Inch (1) 2-5/8 Inch (1) 3-3/16 Inch (1) 3-5/8 Inch (1) Strap Material Steel (6) Strap Thickness 18 Gauge (1) Strap Width 1-3/16 Inch (5) 3-11/16 Inch (1) Support Structure (1) Temperature Rating -58 to 230 Deg F (10) Type 2-Piece (1) Adjustable Clevis (1) Adjustable, Clevis (1) Adjustable, Split Ring (1) C/Z-Purlin Clamp (1) Clevis (11) Corner (1) Corner Gusset (1) H-Frame Kit (1) Hex, Straight (1) Loop (5) Loop, Standard Duty (3) Low Compression (1) Multi-Purpose (1) Offset (1) Pipe to Strut (1) Pipe to Strut, Cushion (1) Pipe/Conduit to Strut, Universal (2) Pipe/Tube to Strut (11) Purlin Clamp (2) Rigid Pipe to Strut (6) Self-Locking (2) Side Beam Attachment (1) Side Mount (5) Single U (1) Snap-On, Press-On (1) Split Ring (2) Split Ring, Standard Duty (5) Square (1) Stand-Off, 2-Hole (1) Standard Duty, Split Ring (5) Straight (1) Telescoping, Adjustable (2) Tubing to Strut (1) Universal (7) Universal Conduit/Pipe to Strut (1) Wall /Ceiling Plate (1) Wall/Ceiling Flange (1) Weldable (1) Wide Throat, Universal (3) With Spring (1) Without Spring (2) Z-Purlin Clip (1) VENDOR Product No TSGB16 (1) Width 1-5/8 Inch (1) 2 Inch (1) 3/4 Inch (1)