Tubular Brass-waste & Overflows & Stops, Sj Fittings

Angle 22-1/2 Degree (3) 45 Degree (73) 90 Degree (178) Beam Load Rating 170 Pound (2) 2450 Lb at 0.65 CG (1) 350 Pound (2) 474 Lb at 25000 PSI (1) Bonnet Material ASTM B61 Bronze (17) Bonnet Type Union (17) Capacity 1460 Pound at 650 Deg F, 1144 Pound at 750 Deg F (1) Center Distance 2-13/16 Inch (1) Center Spacing 2 Inch (7) Channel Position Centered (1) Channel Width 1-5/8 Inch (3) Clamp Material ASTM A1011/A1008 Hot/Cold Rolled Steel (2) ASTM A123/A153 Carbon Steel (1) Carbon Steel (12) Malleable Iron (12) Color/Shade Black (1) White (2) Configuration Elongated Hole (2) Slotted (5) Construction 2-Piece (8) Cross Section Area 0.294 Square Inch (1) 0.552 Sq Inch (1) 0.552 Square Inch (4) 1.008 Sq-In (1) Diameter 1-1/2 Inch (3) Disc Material ASTM A536 Ductile Iron (1) EPDM (2) Nitrile (2) ASTM A276 S42000 Hardened Stainless Steel (6) End Connection Female Threaded (52) Female Threaded x Female Threaded (17) Female Threaded x Female Threaded x Female Threaded (217) Female Threaded x Female Threaded x Female Threaded x Female Threaded (10) Female Threaded x Female Threaded x Male Threaded (1) Female Threaded x Male Threaded (45) Flange x CTS (2) Flanged x Flanged (1) Flanged x Flanged x Flanged (1) Grooved (9) Grooved x Female Threaded (1) Grooved x Flanged (2) Grooved x Grooved (72) Grooved x Grooved x Grooved (10) Grooved x Grooved x Grooved x Grooved (2) Grooved x Grooved x Threaded (8) Grooved x Male Threaded (5) Grooved x Threaded (12) Male Threaded (27) Male Threaded x Female Threaded (78) Male Threaded x Grooved (1) Male Threaded x Male Threaded (460) Socket Weld (6) Socket Weld x Socket Weld (47) Socket Weld x Socket Weld x Socket Weld (6) Welded x Female Threaded (1) End to End Distance 3-13/16 Inch (1) 4-5/8 Inch (1) 5-1/4 Inch (1) 5-13/16 Inch (2) 8-1/8 Inch (1) 2.31 Inch (2) 2.44 Inch (1) 2.69 Inch (1) 2.88 Inch (2) 3.13 Inch (2) 3.38 Inch (3) 3.88 Inch (2) 4 Inch (1) 4.63 Inch (1) 5 Inch (1) 6 Inch (1) Finish ASTM A153 Galvanized (5) Black (761) Copper Colored Epoxy (3) Copper Plated (22) Electrogalvanized (28) Epoxy Coated (2) Galvanized (367) Hot Dip Galvanized (6) Hot Dip Galvanized (Strap), Zinc Plated (Bolt and Nut) (1) Hot Dip Galvanized Zinc Plated (Bolt and Nut) (1) Hot Dipped Galvanized (5) Orange (1) Orange Painted (110) Plain (14) Powder Coated Supr-Green (3) Pre-Galvanized (5) Rust Inhibiting Orange Painted (3) Rust Inhibiting Paint (1) Zinc Plated (6) Flange Outside Diameter 10 Inch (4) 10.75 Inch (1) 11 Inch (5) 12.75 Inch (1) 13-1/2 Inch (5) 2-3/16 Inch (1) 2.875 Inch (1) 3.5 Inch (1) 4 Inch (1) 4-1/2 Inch (1) 4-5/8 Inch (1) 4.5 Inch (1) 5 Inch (2) 5-1/2 Inch (1) 5.563 Inch (1) 6 Inch (2) 6.625 Inch (1) 7 Inch (4) 7-1/2 Inch (5) 8.625 Inch (1) 9 Inch (6) Height 6 Inch Length 13 Inch (3) Material ASTM F409 Polypropylene (1) Plastic (2) Nominal Size 1 Inch (3) 1-1/2 Inch (3) 1-1/4 Inch (3) 1/2 Inch (3) 2 Inch (3) 3/4 Inch (2) Type Telescopic (1)