Check Valves

Casing Material ASTM Class 25 Cast Iron (Switch) (1) Cast Iron (3) Powder Coated Epoxy Finished ASTM Class 25 to 30 Cast Iron (1) Discharge Head 20.5 Foot (1) 21.5 Foot (1) 22 Foot (1) 23 Foot (4) Discharge Size 1-1/2 Inch (5) 2 Inch (2) End Connection Hub x Threaded (1) Threaded (1) Threaded Discharge (2) Threaded Outlet (3) Float Type 2-Pole Mechanical Switch (1) 4-Pole Integral Mechanical (1) Integral Mechanical (1) Low Voltage Vertical Master Switch (1) Mechanical Switch (1) Piggyback Variable Level (1) Variable Level (1) Flow Rate 128 GPM (2) 39 GPM (1) 72 GPM (4) Housing Material ASTM Class 25 Epoxy Powder Coated Cast Iron (1) Cast Iron (4) Powder Coated Epoxy Cast Iron (1) Powder Coated Epoxy Finished ASTM Class 25 to 30 Cast Iron (1) Impeller Design Non-Clogging Vortex (7) Impeller Material Engineered Plastic (2) Engineered Plastic with Metal Insert (1) Glass-Filled Thermoplastic (1) Metal Insert Plastic (1) Plastic (2) Motor Type Class B Insulation Oil-Filled Hermetically Sealed Permanent Split Capacitor (1) Class B Insulation Oil-Filled Permanent Split Capacitor (1) Class B Insulation, Oil Filled Permanent Split Capacitor (1) Class B Insulation, Oil Filled, Hermetically Sealed, Split Phase, Automatic Reset Thermally Overload Protected (1) Oil-Filled, Hermetically Sealed (1) Oil-Filled, Hermetically Sealed, Permanent Split Capacitor (1) Permanent Split Capacitor (Primary Pump) (1) Options Piggyback Variable Level Float Switch, SmartPak Plus Residential Alternator, Variable Level Control Switch, Duplex Electrical Alternator Control Panel, 18 Inch x 30 Inch Basin, A-Pak Alarm System, Watertight Junction Box, Rail System and Disconnect (1) Pump Stand (2) Overall Dimensions 10-1/8 Inch Length x 7-7/8 Inch Width x 12-1/16 Inch Height (1) 10-1/8 Inch Width x 12-1/6 Inch Height (1) 12-1/8 Inch Length x 7-7/8 Inch Width x 12-1/16 Inch Height (1) 13-5/32 Inch Width x 14-9/32 Inch Height (2) 7-7/8 Inch Width x 12-1/6 Inch Height (1) Power Cord Length 15 Foot Power Rating 1/2 HP (6) 1/3 to 1/2 HP (1) Shaft Material AISI 1215 Cold Roll Steel (1) AISI 1215 Cold Rolled Steel (5) Cold Rolled Steel (1) Shaft Seal Details Carbon and Ceramic Mechanical (1) Carbon and Ceramic Mechanical Seal (3) Carbon and Ceramic Seal (2) Carbon and Ceramic, Single (1) Solid Size 1/2 Inch (3) 1/2 Inch (Spherical) (1) 1/2 Inch Spherical (1) 2 Inch (1) 2 Inch (Spherical) (1) Speed Rating 1550 to 3450 RPM (1) 1725 RPM (5) 1750 RPM (1) Suction Size 4 Inch Inlet (1) Temperature Rating 130 Deg F (6) Type Pre-Assembled, Submersible (1) Single Seal, Non-Automatic, Submersible, Simplex (1) Single Seal, Submersible (1) Submersible (1) Submersible, Automatic (2) Submersible, Non-Automatic (1)