Check Valves

Casing Material Powder Coated Epoxy ASTM Class 25 Cast Iron (1) Discharge Head 26 Foot (1) Discharge Size 1-1/2 Inch (1) End Connection Hub x Threaded (1) Finish Electrogalvanized (14) Electrogalvanized, Pre-Galvanized (1) Hot Dip Galvanized (Strap), Zinc Plated (Bolt and Nut) (1) Hot Dip Galvanized Zinc Plated (Bolt and Nut) (1) Hot Dipped Galvanized (4) Pre-Galvanized (1) Float Type Single/Double Piggyback Variable Level Switch (1) Flow Rate 93 GPM (1) Hanger Mounting Size 1/2 Inch (4) 3/4 Inch (1) 3/8 Inch (6) 3/8 Inch Rod (5) 5/8 Inch (2) 7/8 Inch (1) 7/8 Inch Rod (1) Height 10-9/16 Inch (1) 16-1/2 Inch (1) 17-15/16 Inch (1) 2-1/2 Inch (1) 2-13/32 Inch (1) 2-3/32 Inch (1) 2-5/16 Inch (1) 3-3/8 Inch (1) 4-17/32 Inch (1) 4-5/16 Inch (1) 5-9/32 Inch (1) 6-1/16 Inch (1) 6-13/16 Inch (1) 6-3/4 Inch (1) 7-25/32 Inch (1) 7-7/16 Inch (1) 9-1/16 Inch (1) Housing Material Powder Coated Cast Iron (1) Impeller Design Non-Clogging Vortex (1) Impeller Material Cast Iron (1) Insulation Thickness 1 Inch, 1-1/2 Inch, 2 Inch (1) Load Rating 1130 Pound (Static) (4) 1430 Pound (Static) (1) 150 Pound (1) 1940 Pound (Static) (1) 250 Lb (2) 250 Pound (3) 260 Pound (1) 350 Lb (1) 350 Pound (1) 3600 Pound (Static) (1) 3800 Pound (1) 400 Pound (1) 610 Pound (1) 610 Pound (Static) (1) 610 Pound Static (1) Material ASTM A569/A123/A153 Carbon Steel (3) ASTM B633 Carbon Steel (5) Carbon Steel (3) Steel (10) Maximum Pipe Size 1 Inch (1) 1-1/2 Inch (1) 1-1/4 Inch (1) 1/2 Inch (2) 10 Inch (1) 12 Inch (1) 2 Inch (2) 2-1/2 Inch (1) 3 Inch (3) 3-1/2 Inch (2) 3/4 Inch (2) 4 Inch (2) 5 Inch (1) 6 Inch (1) Minimum Pipe Size 1 Inch (1) 1-1/2 Inch (1) 1-1/4 Inch (1) 1/2 Inch (2) 10 Inch (1) 12 Inch (1) 2 Inch (2) 2-1/2 Inch (1) 3 Inch (3) 3-1/2 Inch (2) 3/4 Inch (2) 4 Inch (2) 5 Inch (1) 6 Inch (1) Motor Type Class B Insulation, Oil Filled Hermetically Sealed Split Phase or 3-Phase Overall Dimensions 12-1/4 Inch Length x 12-1/4 Inch Height (1) Pipe Size 1-1/2 Inch, 2 Inch, 3 Inch, 3-1/2 Inch, 4 Inch (1) Power Cord Length 10 Foot (1) Power Rating 1/2 HP (1) Shaft Material AISI 1215 Cold Rolled Steel Shaft Seal Details Carbon-Ceramic Mechanical Seal (1) Shield Length 12 Inch (1) Shield Material Carbon steel (1) Shield Number 8A (1) Shield Thickness 16 Gauge (1) Solid Size 5/8 Inch (1) Speed Rating 1750 RPM (1) Suction Size 4 Inch (1) Temperature Rating 450 Deg F (11) 130 Deg F (1) Type 180 Degree (1) Adjustable Clevis (2) Adjustable Clevis, Heavy Duty (1) Clevis (9) Light Duty Adjustable Clevis (3) Light Duty, Adjustable Clevis (6) Single Seal, Submersible, Automatic (1)