Selfeed_Bits

Blade Material Bi-Metal (12) Cut Material Metal, Non-Ferrous Metal, Wood with Nail, PVC, Duct, Ceiling Tile, Plaster/Dry Wall (1) Steel, Stainless Steel, Acid Resistant Steel, Non-Ferrous Metal, Cast Iron, Aluminum, Wood, Medium Density Fiberboard, Gypsum Plasterboard, Sandwich Material, PVC (8) Thick/Thin Metal, Aluminum, Plastic, Wood (3) Cutting Depth 1-5/8 Inch (12) Diameter 1 Inch (1) 1-1/16 Inch (1) 1-1/4 Inch (1) 1-5/8 Inch (1) 1-7/8 Inch (1) 2-1/8 Inch (1) 2-3/4 Inch (1) 3-1/4 Inch (1) 3/4 Inch (1) 5 Inch (1) 5/8 Inch (1) 7/8 Inch (1) Finish Thermoset Paint Coated Number of Teeth per Inch 3.5 (3) 4 to 6 (8) Speed Rating 105 RPM (Stainless Steel), 140 RPM (Cast Iron), 210 RPM (Mild Steel), 280 RPM (Non-Ferrous), 315 RPM (Aluminum), 1200 RPM (Wood), 600 RPM (Medium Density Fiberboard) (1) 140 RPM (Stainless Steel), 180 RPM (Cast Iron), 275 RPM (Mild Steel), 410 RPM (Aluminum) (1) 175 RPM (Stainless Steel), 235 RPM (Cast Iron), 350 RPM (Mild Steel), 525 RPM (Aluminum) (1) 195 RPM (Stainless Steel), 260 RPM (Cast Iron), 390 RPM (Mild Steel), 585 RPM (Aluminum), 520 RPM (Non-Ferrous), 1500 RPM (Wood), 750 RPM (Medium Density Fiberboard) (1) 230 RPM (Stainless Steel), 300 RPM (Cast Iron), 460 RPM (Mild Steel), 690 RPM (Aluminum), 600 RPM (Non-Ferrous), 1500 RPM (Wood), 750 RPM (Medium Density Fiberboard) (1) 275 RPM (Stainless Steel), 365 RPM (Cast Iron), 550 RPM (Mild Steel), 730 RPM (Non-Ferrous), 825 RPM (Aluminum), 1500 RPM (Wood), 750 RPM (Medium Density Fiberboard) (1) 30 RPM (Stainless Steel), 45 RPM (Cast Iron), 65 RPM (Mild Steel), 90 RPM (Aluminum) (1) 480 RPM (Aluminum), 215 RPM (Cast Iron), 325 RPM (Mild Steel), 160 RPM (Stainless Steel) (1) 50 RPM (Stainless Steel), 70 RPM (Cast Iron), 105 RPM (Mild Steel), 155 RPM (Aluminum), 140 RPM (Non-Ferrous), 700 RPM (Wood), 350 RPM (Medium Density Fiberboard) (1) 60 RPM (Stainless Steel), 80 RPM (Cast Iron), 125 RPM (Mild Steel), 185 RPM (Aluminum) (1) 80 RPM (Stainless Steel), 105 RPM (Cast Iron), 160 RPM (Mild Steel), 240 RPM (Aluminum) (1) 90 RPM (Stainless Steel), 120 RPM (Cast Iron), 180 RPM (Mild Steel), 270 RPM (Aluminum), 240 RPM (Non-Ferrous), 1200 RPM (Wood), 600 RPM (Medium Density Fiberboard) (1) Type Variable Pitch (12)