Pipe_Wrenches

Arbor Size 1 Inch (1) 20 Millimeter (1) 20 MM (1) 3/8 Inch (1) 3/8 Inch Hex (1) 3/8 Inch, 7/16 Inch (2) 5/8 Inch (5) Battery Capacity 5 Amp Hour (1) Battery Included No (1) Yes (2) Battery Type 18 Volt (1) M12 Redlithium XC4.0 (1) Battery Voltage 12 Volt (5) 18 Volt (10) Belt/Disc/Pad Details Backing Pad (1) Wheel (2) Belt/Disc/Pad Size 4-1/2 Inch Diameter (1) 4-1/2 Inch or 5 Inch (1) 7 Inch (1) Bit Size #1 (3) #2 (5) #3 (3) 2 (1) T15 (1) T20 (1) T25 (2) T30 (1) Bit Sizes (1) 1 to 3/32 Inch Hex Bit, (1) 1 to 7/64 Inch Hex Bit, (1) 1 to 1/8 Inch Hex Bit, (1) 1 to 9/64 Inch Hex Bit, (1) 1 to 5/32 Inch Hex Bit, (1) 1 to 3/16 Inch Hex Bit, (1) 1 to 1/4 Inch Hex Bit, (1) 1 to 3 Millimeter Hex Bit, (1) 1 to 4 Millimeter Hex Bit, (1) 1 to 5 Millimeter Hex Bit, (1) 1 to 6 Millimeter Hex Bit, (2) 1 Inch PH1 Phillips Bit, (8) 1 Inch PH2 Phillips Bit, (2) 1 Inch PH3 Phillips Bit, (1) 1 Inch PR2 Phillips Reduced Bit, (1) 1 Inch SQ1 Square Bit, (3) 1 Inch SQ2 Square Bit, (2) 1 Inch SQ3 Square Bit, (1) 1 Inch T10 Torx Bit, (1) 1 Inch T15 Torx Bit, (3) 1 Inch T20 Torx Bit, (5) 1 Inch T25 Torx Bit, (1) 1 Inch T27 Torx Bit, (1) 1 Inch T30 Torx Bit, (1) 1 Inch T40 Torx Bit, (1) 1 Inch SL #8 Slotted Bit, (2) 1 Inch SL #10 Slotted Bit, (1) 1/4 Inch Insert Magnetic Nut Driver, (1) 5/16 Inch Insert Magnetic Nut Driver, (1) 3/8 Inch Insert Magnetic Nut Driver, (1) 1/4 Inch Insert Socket Adapter, (1) 3/8 Inch Insert Socket Adapter, (1) 1/2 Inch Insert Socket Adapter (1) (1) 1/4 Inch, 1/8 Inch, 3/16 Inch, 3/32 Inch, 5/32 Inch, 5/64 Inch, 7/64 Inch, 9/64 Inch Hex, (1) #1, #3, PR2, (3) #2, Phillips, (1) #8, #12, (2) #10, Slotted, (1)#1, #3, (2) #2 Square, (1) T10, T15, T27, T30, T40, (2) T20, T25 (1) (2) 2 Inch T25, (1) 2 Inch T20, (2) 1 Inch T25, (1) 1 Inch T20/T15 (Torx Bit), (1) 2 Inch SQ3/SQ2, (1) 1 Inch SQ1/SQ3, (2) 1 Inch SQ2 (Square Bit), (1) 1 Inch #10, #8, (1) 2 Inch #10 (Slotted Bit), (1) 1 Inch PR2/P1/P3, (1) 2 Inch P3, (4) 2 Inch P2, (2) 1 Inch P2 (Phillips Bit), (1) 1 Inch 5/32 Inch/3/16 Inch/1/8 Inch/1/4 Inch (Hex Bit), (1) 5/16 Inch, 3/8 Inch, 1/4 Inch (Magnetic Nut Driver), (1) 3/8 Inch, 1/2 Inch (Socket Adapter), (1) 1/8 Inch Drill Bit, (1) 3/16 Inch, 1/4 Inch (Hex Drive Bit) (1) 1 Inch (1) #1, (1) #2, (1) #3, 2 Inch (2) #2, (1) #3 and 3-1/2 Inch (1) #2 Phillips Bit, 1 Inch (1) #8 and (1) #10 Slotted Bit, 1 Inch (1) #1, (1) #2, 2 Inch (2) #2, (1) #3 and 3-1/2 Inch (1) #2 Square Bit, 2 Inch (1) TX15 and (1) TX20 Torx Bit (1) 1 Inch Phillips/Square/Torx/Slotted/ECX (1) 1/4 Inch and 3/16 Inch Hex Bit, 1 Inch #8/#10 and 2 Inch #10 Slotted Bit, 1 Inch SQ1/SQ2/SQ3 and 2 Inch SQ2 Square Bit, 1 Inch T15/T20/T25/T30, 2 Inch T20/T25 Torx Bit, 1 Inch P1/P2/P3 and 2 Inch P2 Phillips Bit, 1 Inch PR2 Reduced Phillips Bit (1) T10, T15, T20, T25, T27, T30, T40 (1) Bit Type Hex, Phillips, Square, Torx, Slotted (1) Phillips, Slotted, Torx, Square (1) Phillips, Slotted, Torx, Square, Hex (3) Phillips, Square, Torx, Slotted, ECX (1) Torx (1) Blade Clamp Type Keyless, Quick-Lok (2) Keyless, Quick-Lok, Universal (1) Keyless, Quik-Lock (1) Keyless, Quik-Lok (1) Keyless, Quik-Lok, Universal (3) Blade Diameter 5-3/8 Inch (2) 6-1/2 Inch (2) 7-1/4 Inch (3) Blade Length 12 Inch (8) 27 Inch (2) 35-3/8 Inch (3) 4 Inch (1) 44-7/8 Inch (6) 6 Inch (16) 8 Inch (1) 9 Inch (9) Blade Material Bi-Metal (34) Carbide (Teeth) (3) Carbide Tipped (4) Diamond Grit (5) Durable Stainless Steel (1) Metal (1) Metal Core Body (1) Stainless Steel (3) Blade Thickness 0.02 Inch (10) 0.035 Inch (1) 0.05 Inch (2) 1/16 to 3/16 Inch (1) Blade Width 0.05 Inch (1) 1 Inch (3) 1/2 Inch (11) 3/4 Inch (2) 4-1/4 Inch (1) Blade/Cutting Length 4.5 Inch (1) Bore Size 20 Millimeter (1) 7/8 Inch, 5/8 Inch (1) Boring Diameter 1 Inch (2) 1-1/2 Inch (2) 1-1/4 Inch (2) 1-1/8 Inch (1) 1-3/8 Inch (2) 1/2 Inch (1) 1/3/4 Inch (1) 2 Inch (2) 2-1/4 Inch (1) 2-1/8 Inch (2) 2-9/16 Inch (2) 3 Inch (1) 3/4 Inch (1) 4-5/8 Inch (1) 5/8 Inch (1) 7/8 Inch (1) Cable Size 1/2 Inch Diameter x 6 Foot Length (1) 5/16 Inch Diameter x 25 Foot Length (1) 5/16 Inch Diameter x 35 Foot Length (1) Cable Type Inner Core (1) Inner Core, Bulb Head (1) Retriever Bulb (1) Capacity 1 Inch (2) 1 Inch (Jaw) (1) 1-1/4 Inch (1) 1-1/8 Inch (Solid Bit), 3 Inch (Thin Wall Core Bit) (1) 1.13 Inch (1) 1.75 Inch Jaw (1) 1.77 Inch (1) 1/2 to 1-1/8 Inch Outer Diameter (1) 1/2 to 4 Inch (1) 100 CFM (1) 100 Pound (1) 14 Ounce Cartridge, 16 Ounce Bulk/Suction (1) 18 to 8 AWG (Solid Wire), 20 to 10 AWG (Stranded Wire), #6 and #8 Bolt (1) 2 Inch (3) 2-1/2 Inch (Thin Wall Core Bit), 1 Inch (Solid Bit) (1) 2-1/4 Inch (1) 2-1/8 Inch (Thin Wall Core Bit), 7/8 Inch (Solid Bit) (1) 2.4 Inch (1) 2.5 Inch (1) 2.75 Inch (1) 250 Pound (1) 3/8 to 1 Inch (1) 3/8 to 1-1/2 Inch (1) 5/8 Inch (Solid Bit) (2) 50 Pound (1) 75 Pound (1) Chuck Capacity 3/8 Inch (1) Chuck Type Ratcheting, Single Sleeve (1) Color Black (1) Black/Red (2) Dark Gray (1) Red and Black (3) Configuration NEMA 1-15P (1) Construction Double Wing Spurs, Dual Cutting Edge (1) Split Point (5) Split Point, Heavy Duty (1) Split Point, Thicker (1) Cord Type Double Insulated (1) Cut Material Brick, Block, Cement Board, Fiberglass, Tile, Granite (1) Cast Iron, Hard Tile, Masonry, Abrasive and Hard Metal (2) Ceramic or Porcelain Tile (1) Cold Rolled Steel, Stainless Steel (2) Copper (7) Copper Tube (3) Diamond Metal (1) Drywall, Cement Board, PVC, Plastics (1) EMT, Tube, Duct, Sheet Metal (1) Ferrous Metal (1) Heavy Bar, Large Sections of Steel, Aluminum and Large Diameter Hard Material (1) Metal (5) Metal, Black Pipe, Angle Iron, Cast Iron, Stainless Steel, High Strength Alloy (2) Metal, Non-Ferrous Metal, Wood with Nail, PVC, Duct, Ceiling Tile, Plaster/Dry Wall (1) Metal, Rigid Conduit, Strut (1) Metal, Strut, Conduit, Angle Iron, Copper Tube, Threaded Rod and Pipe (2) Metal, Strut, Conduit, Angle Iron, Copper Tube, Threaded Rod, Pipe (4) Metal, Wood (2) Metal, Wood, Multi-Material (1) Metal/Stainless Steel (1) Nail Embedded Wood, Abrasive Material, Nails, Shingles, Cement Board, Plaster, Stucco (2) Nail-Embedded Wood, Abrasive Material, Cement Board, Shingles, Plaster, Brick, Block, Fiberglass, Tile, Granite (1) Nail-Embedded Wood, Plastic, Non-Ferrous Metal, PVC, Aluminum, Copper (1) Nail-Embedded Wood, Plastic, Non-Ferrous Metal, PVC, Plastic, Aluminum, Copper (1) Non-Ferrous Metal (1) Non-Ferrous Metal, Non-Metal, Metal (2) Non-Metal (4) Plug Removal (1) PVC, CPVC, PEX, ABS, Rubber (1) PVC/ABS Plastic, Plywood, Wallboard and Laminate (1) PVC/ABS Plastic, Plywood, Wallboard and Laminates (1) Rigid Conduit, Strut (3) Rubber, Plastic, PEX-A Tubing (1) Schedule 80 Pipe, Angle Iron (1) Schedule 80 Pipe, Threaded Rod (1) Scheduled 80 Pipe, Angle Iron (1) Stainless Steel (1) Stainless Steel, Cast Iron, Aluminum, Mild Steel (1) Steel, Aluminum (2) Steel, Stainless Steel, Acid Resistant Steel, Non-Ferrous Metal, Cast Iron, Aluminum, Wood, Medium Density Fiberboard, Gypsum Plasterboard, Sandwich Material, PVC (13) Steel, Stainless Steel, Cast Iron, Aluminum, Mild Steel (1) Thick/Thin Metal, Aluminum, Drywall, Plastic, Wood (3) Thick/Thin Metal, Aluminum, Plastic, Wood (6) Tile, Stone, Glass (4) Wood (1) Wood with Nail (3) Wood, Nail, Shingle, Cement Board, Abrasive Material, Plaster and Stucco (1) Cutting Capacity 1-5/8 Inch x 1-5/8 Inch (1) 18 Gauge (Cold Rolled Steel), 22 Gauge (Stainless Steel) (2) 2 Inch (1) 3 Inch (1) 5 Inch (Round), 2-15/16 Inch x 9 Inch (Rectangular), 4-5/8 Inch x 4-5/8 Inch (Square) (1) 5 Inch (Round)/5 Inch x 5 Inch (Rectangular) (2) 5 Inch x 5 Inch (1) Cutting Depth 1-5/8 Inch (29) 2.34 Inch (1) Cutting Speed 3 Second (2 Inch) (1) Depth 15.2 Inch (1) 16.2 Inch (1) 16.3 Inch (1) Design 135 Degree Rotating Head (1) 230 Degree Rotating Adjustable Head (2) Rotate, Slide, Remove and Hang Light Bar (1) Diameter 1 Inch (1) 1-1/16 Inch (1) 1-1/2 Inch (2) 1-1/4 Inch (2) 1-1/8 Inch (1) 1-3/4 Inch (1) 1-3/8 Inch (4) 1-5/8 Inch (1) 1-7/8 Inch (1) 2 Inch (2) 2-1/2 Inch (1) 2-1/8 Inch (2) 2-3/4 Inch (1) 2-3/8 Inch (1) 2-5/8 Inch (1) 2-9/16 Inch (1) 3 Inch (4) 3-1/2 Inch (1) 3-1/4 Inch (1) 3-5/8 Inch (2) 3/4 Inch (3) 4 Inch (1) 4-1/2 Inch (3) 4-1/4 Inch (2) 4-3/4 Inch (1) 5 Inch (2) 5-3/8 Inch (1) 5/8 Inch (1) 6 Inch (1) 7/8 Inch (1) Direction of Cut Right (1) Straight (1)