Hoses & Fittings Hose Fittings (1)

Basin Capacity 4.3 Gallon (1) 41 Gallon (3) 5 Gallon (1) Basin Dimensions 13-3/4 Inch Width x 11-1/8 Inch Height (1) 14-1/2 Inch Top Diameter x 11-3/4 Inch Bottom Diameter x 12-1/2 Inch Height (1) 18 Inch Diameter x 30 Inch Depth (1) 18 Inch Diameter x 30 Inch Height (1) 21 Inch x 30 Inch (1) 24 Inch x 24 Inch (1) 25 Inch Width x 24 Inch Height (1) Basin Material Polyolefin (1) Polypropylene (1) Casing Material ASTM Class 25 Cast Iron (Switch) (1) Cast Iron (10) Cast Iron (Switch) (2) Epoxy Powder Coated Class 25 Cast Iron (3) Non-Corrodible Plastic (1) Polymer (1) Polypropylene (1) Powder Coated Class 25 Cast Iron (1) Powder Coated Epoxy ASTM Class 25 Cast Iron (1) Powder Coated Epoxy Cast Iron (1) Powder Coated Epoxy Finished ASTM Class 25 Cast Iron (1) Powder Coated Epoxy Finished ASTM Class 25 to 30 Cast Iron (1) Contact Configuration 1NO (1) Discharge Head 0 to 24 Feet (1) 0 to 30 Foot (1) 10 Foot (1) 105 Foot (1) 14.5 Foot (1) 15 Foot (1) 18 Foot (3) 19.25 Foot (8) 20 Foot (4) 20.5 Foot (1) 21 Foot (3) 21.5 Foot (5) 22 Foot (2) 23 Foot (6) 24 Foot (1) 25 Foot (1) 26 Foot (1) 33 Foot (1) 34 Foot (1) 38 Foot (1) 42 Foot (1) 44 Foot (2) 48 Foot (1) 5 to 15 Feet (1) 5 to 22 Foot (1) 50 Foot (2) 55 Foot (1) 74 Foot (1) 8 Foot (1) Discharge Size 1-1/2 Inch (34) 1-1/4 Inch or 1-1/2 Inch (1) 2 Inch (18) 2 Inch, 1-1/2 Inch (1) 2 or 3 Inch (1) 3/4 Inch (1) 3/8 Inch (2) Enclosure IP66, IP68 (1) NEMA 1 (1) Enclosure Type NEMA 4X (1) End Connection Male Hose Threaded x Male Threaded ENHANCED SEO SEO (1) Finish Rough (1) Float Size 2.74 Inch Diameter x 4.83 Inch Length (1) 3.38 Inch Diameter x 4.55 Inch Length (1) Float Type 2 Pole Mechanical Switch (1) 2-Pole Mechanical (2) 2-Pole Mechanical Switch (2) 2-Pole Piggyback Variable Level Mechanical (1) 20 Foot Piggyback Variable Level (1) 4-Pole Integral Mechanical (1) Adjustable (1) Adjustable, Wide Angle, Piggyback (1) Automatic (1) Automatic, Adjustable, Wide Angle, Piggyback (1) Automatic, Piggyback (1) Double Piggyback, Variable Level Float Switch (1) Electro Mechanical (1) Integral Mechanical (1) Low Voltage Vertical Float Switch (1) Low Voltage Vertical Master Switch (1) Mechanical (3) Mechanical Switch (2) Mechanical, Piggyback Variable Level (4) Omnidirectional, Piggyback (1) Piggyback (2) Piggyback Variable Level (5) Piggyback Variable Level Switch (1) Piggyback, Wide Angle (1) Single/Double Piggyback Variable Level Float Switch (1) Single/Double Piggyback Variable Level Switch (2) Variable Level (1) Vertical Float Switch (1) Vertical Magnetic (3) Flow Rate 0 to 140 GPM (1) 0 to 50 GPM (1) 1.8 to 20 GPM at 80 PSI (1) 118 GPM (1) 125 GPM at 5 Foot (2) 128 GPM (6) 141 GPM at 5 Foot (1) 19 to 43 GPM (1) 23 GPM (1) 32 GPM (1) 3300 GPH (1) 35 GPM (1) 38 GPM at 5 Foot (1) 39 GPM (1) 43 GPM (7) 44 GPM (3) 45 to 115 GPM (1) 5 to 23 GPM (1) 52 GPM (2) 56 GPM (1) 6 to 39 GPM (1) 69 GPM (1) 72 GPM (4) 76 GPM at 15 Foot (1) 77 GPM (2) 78 GPM (1) 86 GPM (2) 9 GPM (1) 90 GPM (2) 93 GPM (1) Housing Material ABS Plastic (1) Aluminum (1) ASTM Class 25 Epoxy Powder Coated Cast Iron (1) Cast Iron (22) Class 25 Cast Iron (2) Class 25 Powder Coat Painted Cast Iron (1) Deep Finned Powder Coated Aluminum (1) Deep Finned Powder Coated Aluminum, Polypropylene (1) Engineered Plastic (2) Epoxy Powder Coated Cast Aluminum (1) Epoxy Powder Coated Cast Iron (2) Epoxy Powder Coated Class 25 Cast Iron (3) Polyethylene (2) Polypropylene (1) Powder Coated Cast Iron (2) Powder Coated Class 25 Cast Iron (1) Powder Coated Epoxy Cast Iron (1) Powder Coated Epoxy Finished ASTM Class 25 Cast Iron (1) Powder Coated Epoxy Finished ASTM Class 25 to 30 Cast Iron (1) Powder Coated Epoxy Finished Cast Iron (1) Powder Coated Epoxy, Cast Iron (1) PVC (1) Stainless Steel (1) Impeller Design 2-Vane (1) 2-Vane, Semi-Open (1) Non-Clog (1) Non-Clogging (2) Non-Clogging Vortex (32) Semi-Open (1) Vortex (9) Impeller Material Cast Iron (4) Class 25 Cast Iron (1) Engineered Plastic (6) Engineered Plastic with Metal Insert (3) Engineered Polymer (5) Engineered Thermoplastic (5) Engineered Thermoplastic Elastomer (1) Glass-Filled Thermoplastic (1) Metal Insert Engineered Plastic (1) Metal Insert Plastic (2) Plastic (4) Plastic, Cast Iron/Bronze (1) Plastic/Cast Iron/Bronze (2) Polymer (3) Thermoplastic (7) Thermoplastic Elastomer (1) Inlet Size 1-1/2 Inch (1) Material ABS Plastic (1) Durable Polyethylene (1) Durable PVC/Polypropylene (1) Polyethylene (2) Polyethylene (Basin) (1) Polyethylene (Basin), Cast iron (Cap/Motor Housing/Pump Housing) (1) Polypropylene (2) PVC (2) Stainless Steel (Hose Clamp), ABS Nylon (Mounting Clamp) (1) C36000 Brass (1) Motor Type Class B Insulation Oil Filled Hermetically Sealed Shaded Pole (1) Class B Insulation Oil-Filled Hermetically Sealed Capacitor (2) Class B Insulation Oil-Filled Hermetically Sealed Permanent Split Capacitor (5) Class B Insulation Oil-Filled Permanent Split Capacitor (4) Class B Insulation, Oil Filled Hermetically Sealed Permanent Split Capacitor (2) Class B Insulation, Oil Filled Hermetically Sealed Split Phase or 3-Phase (1) Class B Insulation, Oil Filled Permanent Split Capacitor (1) Class B Insulation, Oil Filled Permanent Split Capacitor, NEMA B Design (1) Class B Insulation, Oil Filled, Hermetically Sealed, Split Phase, Automatic Reset Thermally Overload Protected (1) Class B Insulation, Oil-Filled Hermetically Sealed Permanent Split Capacitor (1) NEMA B Class B Insulation, Hermetically Sealed, Oil Filled, Permanent Split Capacitor (1) NEMA B Insulated Class B, Oil Filled, Permanent Split Capacitor, Thermal Overload (1) Oil Filled (1) Oil Filled Hermetically Sealed (1) Oil Filled Permanent Split Capacitor, Class B Insulation and NEMA B Design (2) Oil Filled, Capacitor Start, Class B Insulated, NEMA B Design Rated, Continuous Duty (1) Oil Filled, Hermetically Sealed, Thermal Overload Protection (1) Oil Filled, Hermetically-Sealed with Class B Insulation (1) Oil Filled, Split Phase, Class B Insulation (1) Oil Filled, Thermally Protected (1) Oil Filled, Thermally Protected, Hermitically Sealed, Submersible (1) Oil-Filled and Hermetically Sealed, Permanent Split Capacitor, Auto Reset Thermal Overload (1) Oil-Filled, Hermetically Sealed (2) Oil-Filled, Hermetically Sealed, Permanent Split Capacitor (1) Oil-Filled, Hermetically Sealed, Thermal Overload Protection (1) Permanent Split Capacitor (Primary Pump) (1) Permanent Split Capacitor, Oil Filled, Hermetically Sealed, Class B Insulation (1) Shaded Pole (1) Shaded Pole, Oil Filled, Hermetically Sealed, Auto Reset Thermal Overload Protection, Class B Insulation (1) Split Phase, Auto Reset Thermal Overload Protection (1) Thermal Overload Protection (2) Thermal Overload Protection, Hermetically Sealed, Oil Filled, Permanent Split Capacitor (1) Thermally Protected (1) Thermally Protected, Permanent Split Capacitor (2) Mounting Pipe Clamp (1) Nominal Size 1-1/2 Inch (2) 1-1/2 Inch x 1-1/2 Inch (2) 2 Inch x 2 Inch (2) Number of Phases 3 (1) Operating Temperature 140 Deg F (3) Options 6 Foot/50 Foot Power Cord Length (1) Alarm (1) Cast Iron Impeller (1) High Water Switch (1) Piggyback Variable Level Float Switch, SmartPak Plus Residential Alternator, Variable Level Control Switch, Duplex Electrical Alternator Control Panel, 18 Inch x 30 Inch Basin, A-Pak Alarm System, Watertight Junction Box, Rail System and Disconnect (1) Pump Stand (7) Safety Switch, 20 Foot Tube (1) Side/Top Inlet (1) Overall Dimensions 10 Inch Length x 7-1/4 Inch Width x 12-1/8 Inch Height (1) 10 Inch Length x 7-7/8 Inch Width x 10-1/16 Inch Height (1) 10 Inch Width x 6 Inch Depth x 12 Inch Height (1) 10-1/16 Inch Length x 7-7/8 Inch Width x 10-1/16 Inch Height (2) 10-1/8 Inch Length x 7-7/8 Inch Width x 12-1/16 Inch Height (1) 10-1/8 Inch Width x 12-1/6 Inch Height (1) 10-3/16 Inch Length x 12-13/32 Inch Height (1) 10-3/32 Inch Length x 7-3/4 Inch Width x 11-11/16 Inch Height (1) 10-3/32 Inch Width x 10-1/16 Inch Height (1) 10.9 Inch Length x 7.5 Inch Width x 11.4 Inch Height (1) 10.9 Inch Length x 7.5 Inch Width x 12 Inch Height (1) 11-1/8 Inch Length x 5 Inch Width x 5 Inch Height (1) 11-1/8 Inch Length x 5 Inch Width x 6.5 Inch Height (1) 11-13/32 Inch Length x 5-5/8 Inch Width x 5-1/5 Inch Height (1) 11.2 Inch Length x 7 Inch Width x 16.4 Inch Height (1) 12-1/4 Inch Length x 12-1/4 Inch Height (1) 12-1/8 Inch Length x 7-7/8 Inch Width x 12-1/16 Inch Height (1) 12-13/32 Inch Height (1) 13 Inch Length x 11 Inch Width x 14-5/16 Inch Height (2) 13-1/16 Inch Length x 11-1/32 Inch Width x 14-1/4 Inch Height (1) 13-1/7 Inch Length x 11-1/3 Inch Width x 14-3/4 Inch Height (2) 13-5/32 Inch Width x 14-9/32 Inch Height (3) 13.06 Inch Length x 11.218 Inch Width x 14-5/8 Inch Height (1) 14 Inch Height (1) 141.1 Inch Length x 21.2 Inch Height (1) 21 Inch Width x 30 Inch Height (1) 24 Inch Diameter x 24 Inch Height (1) 7-3/4 Inch Length x 12-1/8 Inch Height (2) 7-7/8 Inch Length x 10-1/16 Inch Width x 10-1/16 Inch Height (1) 7-7/8 Inch Width x 10-1/6 Inch Height (1) 7-7/8 Inch Width x 12-1/6 Inch Height (1) 7.5 Inch Width x 5.5 Inch Depth x 10 Inch Height (1) 8-3/32 Inch Width x 10-1/2 Inch Height (1) 9 Inch Width x 10 Inch Height (2) 9-3/4 Inch Length x 4-1/2 Inch Width x 7 Inch Height (1) 9-9/16 Inch Length x 7-7/8 Inch Width x 10-1/16 Inch Height (1) 9.5 Inch Length x 6.3 Inch Width x 13 Inch Height (1) 9.5 Inch Length x 6.5 Inch Width x 10.7 Inch Height (2) 9.6 Inch Width x 10.5 Inch Height (1) 9.6 Inch Width x 12.4 Inch Height (1) Power Cord Length 10 Feet (1) 10 Foot (21) 10 Foot (Neoprene) (1) 15 Foot (7) 20 Foot (8) 25 Foot (2) 6 Foot (2) 7-1/2 Foot (1) 8 Foot (1) 9 Foot (5) 9 Inch (1) 9 or 20 Foot (1) Power Rating 1 HP (2) 1/2 HP (23) 1/3 HP (7) 1/3 to 1/2 HP (1) 1/30 HP (2) 1/4 HP (3) 1/6 to 1/2 HP (1) 3/10 HP (7) 3/4 HP (2) 4/10 HP (8) Pressure Rating 20 to 100 PSI (1) 25 PSI (3) 25 PSI, 4.3 PSI (Static) (1) 4.3 PSI (1) 40 to 80 PSI (1) 50 PSI at 130 Deg F (1) 75 PSI (1) Reservoir Capacity 1 US Quart (1) 2 US Quart (1) Reservoir Material High Impact ABS (1) Sealed Basin Yes (1) Shaft Material 300/400 Stainless Steel (4) 416 Stainless Steel (2) A151 1215 Steel (2) AISI 1215 Cold Roll Steel (1) AISI 1215 Cold Rolled Steel (18) AISI 1215 Steel (4) Cold Rolled Steel (1) JIS S45C Steel (3) Polypropylene (1) Stainless Steel (11) Shaft Seal Details Carbon and Ceramic (4) Carbon and Ceramic Mechanical (2) Carbon and Ceramic Mechanical Seal (9) Carbon and Ceramic Mechanical Seal, Single (2) Carbon and Ceramic Seal (3) Carbon and Ceramic Seal, Single (1) Carbon and Ceramic, Single (5) Carbon-Ceramic Face Mechanical Seal (1) Carbon-Ceramic Mechanical Seal (4) Carbon/Ceramic (1) Engineered Double Lip Seal (2) Engineered Double Lip Seal with Stainless Steel Spring (2) Hermitically Seal (1) Rubber Grommet Seal (1) Tank Cord Seal (1) Unitized Carbon/Ceramic Design with Buna-N Elastomer (1) Unitized Ceramic Carbon (1) Unitized Ceramic Carbon Mechanical Seal (2) Unitized Ceramic/Carbon (1) Unitized Ceramic/Carbon Seal (1) Size 12 Inch Diameter (1) 2.8 Inch Diameter x 3.3 Inch Length (1) 27 Inch (1) 50 Inch (1) 6 Inch Diameter (1) 6 Inch x 4 Inch x 2.25 Inch (Enclosure) (1) 6.5 Inch x 4.5 Inch x 3 Inch (Enclosure) (1) Size A 3/4 Inch (1) Size B 3/4 Inch (1) Solid Size 1/2 Inch (11) 1/2 Inch (Spherical) (5) 1/2 Inch or 3/4 Inch (1) 1/2 Inch Spherical (3) 1/4 Inch (2) 2 Inch (12) 2 Inch (Spherical) (1) 2 Inch Spherical (4) 3/4 Inch (5) 3/8 Inch (3) 3/8 Inch (Spherical) (1) 5/8 Inch (1) Speed Rating 1550 RPM (8) 1550 to 3450 RPM (1) 1725 RPM (17) 1750 RPM (2) 3400 RPM (2) 3450 RPM (17) 7500 RPM (1) Suction Size 3/4 Inch (2) 4 Inch (3) 4 Inch Inlet (1) Temperature Rating 100 Deg F (Liquid), 266 Deg F (Stator), 248 Deg F (Thermal Overload) (1) 104 Deg F (2) 104 Deg F (Liquid Continuous), 266 Deg F (Stator), 221 Deg F (Thermal Overload) (1) 130 Deg F (32) 135 Deg F (1) 140 Deg F (8) 140 Deg F (Intermittent), 104 Deg F (Continuous) (1) 140 Deg F (Liquid), 266 Deg F (Stator), 105 Deg F (Thermal Overload) (1) 140 Deg F (Liquid), 266 Deg F (Stator), 221 Deg F (Thermal Overload) (1) 150 Deg F (Fluid) (2) 221 Deg F (Thermal Overload) (2) Maximum 140 Deg F (Liquid), Maximum 266 Deg F (Stator), 248 Deg F (Thermal Overload) (1) -35 to 100 Deg F (1) Tone Type Horn (2) Type Male, Hose VENDOR Product No 105-0001 (1) Vent Connection 1-1/2 Inch Female Threaded (1) 2 Inch (3) 2 Inch Threaded (1) Voltage Rating 115 Volt (1) 120 Volt AC 50/60 Hertz, 120/230 Volt AC (Terminal Block) (1) 120 Volt AC 60 Hertz (Primary), 9 Volt DC (Secondary/Battery), 120 Volt AC (Auxiliary Contact) (1) 120/230 Volt AC 50/60 Hertz (1) 125/250 Volt AC 50/60 Hertz (1) 200/230/460 Volt AC (1) Warranty 1 Year (1) 1 Year (Date of Installation), 18 Month (Date of manufacture) (1) 3 Year (29) 3 Year (Date of Purchase) (1) 3 Year from the Date of Purchase (1) 3-Year (1) 5 Year (1)