Gas / commercial Water Heaters

Angle 22-1/2 Degree (5) 22.5 Degree (3) 45 Degree (9) 60 Degree (5) 90 Degree (10) Boiler Supply/Return Connection 1 Inch Female Threaded x 1 Inch Female Threaded (1) Color/Finish Black (7) Red, Black (1) End Connection Hub x Hub (2) Hub x Spigot (37) Hub x Spigot x Hub (44) Hub x Spigot x Hub x Hub (26) Hub x Spigot x Threaded (6) Plain End x Plain End (2) Spigot (5) End Type Hub x Spigot (1) ENHANCED SEO SEO (1) Finish Gray (12) Flow Rate 13.7 GPM (1) Gasket Details 1-Piece Molded Elastomeric Sealing (12) 1-Piece Molded Elastomeric Sealing Gasket (2) Gasket Supplied Yes (14) GPH Recovery 235 GPH at 135 Deg F Gross Boiler Output 220000 BTU/Hour Head Loss 0.8 Foot (10 GPM) Heat Exchanger Coil Type Single Wall Inlet/Outlet Connection 3/4 Inch Threaded x 3/4 Inch Threaded (1) Material 301 Series Stainless Steel (1) 301 Stainless Steel (Clamp/Screw Housing/Screw Saddle), 300 Stainless Steel (Shield), 305 Stainless Steel (Screw) (11) 301 Stainless Steel (Worm Drive Clamp/Screw Housing/Screw Saddle), 300 Stainless Steel (Shield), 305 Stainless Steel (Screw) (1) ABS Plastic (1) ASTM A74 Cast Iron (6) Cast Iron (93) Gray Cast Iron (50) Iron (2) Rubber (2) Synthetic Rubber (Body), 301 Stainless Steel (Worm Drive Clamp) (5) Material Specification ASTM 74 (1) ASTM A240/A240M (1) ASTM A240/A240M/C564/C1460 (11) ASTM A74 (93) ASTM A74, CISPI (1) ASTM A74/C564 (37) ASTM A74/C564, CISPI (11) ASTM C1460/C564 (1) ASTM C564/C1460 (1) Nominal Pipe Size 10 Inch (1) 3 Inch (1) 4 Inch (1) 5 Inch (1) 6 Inch (1) 8 Inch (1) Nominal Size 1-1/2 Inch (1) 10 Inch (2) 10 Inch x 10 Inch x 3 Inch (1) 10 Inch x 10 Inch x 4 Inch (2) 10 Inch x 10 Inch x 5 Inch (1) 10 Inch x 10 Inch x 6 Inch (2) 10 Inch x 10 Inch x 8 Inch (2) 12 Inch (2) 12 Inch x 12 Inch x 10 Inch (1) 12 Inch x 12 Inch x 4 Inch (1) 12 Inch x 12 Inch x 5 Inch (1) 12 Inch x 12 Inch x 6 Inch (1) 12 Inch x 12 Inch x 8 Inch (2) 15 Inch x 15 Inch x 6 Inch (1) 2 Inch (6) 2 Inch x 2 Inch x 1-1/2 Inch (1) 2 Inch x 2 Inch x 2 Inch (2) 3 Inch (3) 3 Inch x 3 Inch x 1-1/2 Inch (1) 3 Inch x 3 Inch x 2 Inch (1) 3 Inch x 3 Inch x 2 Inch x 2 Inch (3) 3 Inch x 3 Inch x 3 Inch (1) 4 Inch (3) 4 Inch x 4 Inch x 1-1/2 Inch (1) 4 Inch x 4 Inch x 2 Inch (4) 4 Inch x 4 Inch x 2 Inch x 2 Inch (2) 4 Inch x 4 Inch x 3 Inch (2) 4 Inch x 4 Inch x 3 Inch x 3 Inch (3) 4 Inch x 4 Inch x 4 Inch (1) 5 Inch (4) 5 Inch x 5 Inch x 2 Inch (2) 5 Inch x 5 Inch x 3 Inch (2) 5 Inch x 5 Inch x 4 Inch (3) 5 Inch x 5 Inch x 4 Inch x 4 Inch (1) 6 Inch (7) 6 Inch x 6 Inch x 2 Inch (1) 6 Inch x 6 Inch x 3 Inch (1) 6 Inch x 6 Inch x 4 Inch x 4 Inch (3) 6 Inch x 6 Inch x 5 Inch (2) 8 Inch (4) 8 Inch x 8 Inch x 3 Inch (1) 8 Inch x 8 Inch x 4 Inch (1) 8 Inch x 8 Inch x 4 Inch x 4 Inch (1) 8 Inch x 8 Inch x 5 Inch (1) 8 Inch x 8 Inch x 6 Inch (2) 8 Inch x 8 Inch x 6 Inch x 6 Inch (1) Overall Length 3-3/4 Inch (1) 4 Inch (3) 4-1/2 Inch (2) Pipe End Type Hub x Spigot (5) Pipe Size 2 Inch x 2 Inch (1) 3 Inch x 3 Inch (1) 5 Inch (1) 6 Inch (1) 8 Inch (1) Pipe Size to Horizontal Dimension 12 Inch (1) 9-1/2 Inch (1) Pipe Size to Vertical Dimension 15-1/2 Inch (1) 17 Inch (1) 22-1/6 Inch (1) Pressure Rating 21000 PSI (21) 150 PSI (Working) (1) Relief Valve Details T and P Relief Valve (1) Schedule 40 (1) Size 4 Inch (2) 4 Inch x 1-1/2 Inch (1) 4 Inch x 2 Inch (1) 4 Inch x 2-1/2 Inch (1) 4 Inch x 3 Inch (1) 4 Inch x 4 Inch (1) 4 Inch x 6 Inch (1) Size A 1-1/2 Inch (3) 10 Inch (7) 12 Inch (7) 2 Inch (8) 3 Inch (8) 4 Inch (11) 5 Inch (7) 6 Inch (6) 8 Inch (7) Size B 1-1/2 Inch (2) 1-1/2 Inch or 1-1/4 Inch (2) 1-1/4 Inch or 1 Inch (1) 10 Inch (4) 12 Inch (3) 16 Inch (1) 18 Inch (1) 2 Inch (11) 3 Inch (10) 4 Inch (10) 5 Inch (7) 6 Inch (5) 8 Inch (7) Tank Capacity 43 Gallon (1) Tank Dimensions 22 Inch Diameter x 46-1/4 Inch Height (1) Tank Inner Lining Engineered Enamel Vitraglas (1) Tank Material Heavy Gauge Steel (1) Tank Warranty Lifetime Limited (1) Temperature Rating 212 Deg F (141) Trap Size 4 Inch (1) Type 1-Piece, Flexible (1) 1-Piece, Flexible, Round Head, Cast Iron/Plastic (1) 1-Piece, Flexible, Round Head, Cast Iron/Plastic/Steel (3) 1/16 Bend (5) 1/16 Bend, Straight (3) 1/4 Bend (4) 1/4 Bend, Long (1) 1/4 Bend, Straight (3) 1/6 Bend (5) 1/8 Bend (3) 1/8 Bend, Combination, Long Turn (2) 1/8 Bend, Combination, Long Turn, Reducing (5) 1/8 Bend, Double Combination, Long Return, Reducing (1) 1/8 Bend, Double, Combination, Long Turn (2) 1/8 Bend, Double, Combination, Long Turn, Reducing (2) 1/8 Bend, Straight (4) Closet Bend, Increasing (2) Closet, Notched, Slotted (1) Combination, Long Turn, Reducing (1) Concentric (15) Double (8) Double, Reducing (6) Flexible, Round Head, Cast Iron/Plastic/Steel (1) Increasing, Notched, Slotted (1) Notched, Slotted (1) Reducing (20) Reducing, Combination, Double, Long Turn (1) Reducing, Long Sweep (1) Reducing, Notched, Slotted (4) Reducing, Sanitary (10) Reducing, Sanitary, Tapped (4) Reducing, Shielded, Transition, Cast Iron to Plastic/Steel/Extra Heavy Cast Iron (1) Running (1) Sanitary, Reducing (4) Sanitary, Straight (4) Shielded, Transition, Cast Iron to Plastic/Steel/Extra Heavy Cast Iron (1) Shielded, Transition, Cast Iron/Plastic/Steel to Copper/Plastic/Steel (1) Shielded, Transition, Reducing, Cast Iron/Plastic/Steel to Cast Iron/Plastic/Steel (1) Shielded, Transition, Reducing, Cast Iron/Plastic/Steel to Copper or Plastic/Steel (2) Shielded, Transition, Straight, Cast Iron to Copper (2) Shielded, Transition, Straight, Cast Iron to Plastic/Steel/Extra Heavy Cast Iron (3) Shielded, Transition, Straight, Cast Iron/Plastic/Steel to Cast Iron/Plastic/Steel (2) Shielded, Transition, Straight, Cast Iron/Plastic/Steel to Copper (1) Straight (5) Straight, Open (1) Straight, Sanitary (5) Straight, Tapped (1) Tapped, Straight (1) Washington Test (1) VENDOR Product No SV-155 (1)